mouseover to enlarge
High-Load Furling System — 5mm Luff Wire High-Load Furling System — 5mm Luff Wire
click thumbnail to select

High-Load Furling System — 5mm Luff Wire

Part No. 436
$1,335.48(including GST)  Not available on-line. Please contact Harken Australia at 61-2-8978-8666 or email
Drum Ø (mm)106 mm
Maximum luff wire Ø (mm)5 mm
Maximum working load (kg)907 kg

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

FootnoteIncludes drum and upper swivel. Does not include hoistable swivel. 
Pin-to-pin length (mm)102 mm
Drum Ø (mm)106 mm
Maximum line Ø (mm)6 mm
Jaw width (mm)10 mm
Maximum luff wire Ø (mm)5 mm
Clevis pin Ø (mm)7.9 mm
Weight (g)646 g
Maximum working load (kg)907 kg
Boat length - monohull (m)6.1 - 7.6 m
Boat length - multihull (m)5.5 - 7 m
Includes upper swivel207 
Includes drum208 
Drawing - DWG: (open/save)
Drawing - DXF: (open/save)
3D drawing - IGS: (open/save)
Photo - EPS: (open/save)
Photo - JPG:  436.jpg (open/save)

DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.

  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK