mouseover to enlarge
40 mm Protexit™ Exit Block 40 mm Protexit™ Exit Block
click thumbnail to select

Protexit™ Exit Blocks

40 mm Protexit™ Exit Block

Part No. 1202
$188.10(including GST)  In Stock
Sheave Ø (mm)40 mm
Maximum line Ø (mm)8 mm
Maximum working load (kg)400 kg

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Sheave Ø (mm)40 mm
Length (mm)107 mm
Weight (g)74 g
Maximum line Ø (mm)8 mm
Fasteners (mm)6 FH mm
Fastener spacing (mm)75 mm
A (mm)19.7 mm
B (mm)59.2 mm
Maximum working load (kg)400 kg
Breaking load (kg)800 kg
Drawing - DWG:  1202.dwg (open/save)
3D drawing - IGS:  1202.igs (open/save)
Photo - EPS:  1202.eps (open/save)
Photo - JPG:  1202.jpg (open/save)
  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK